add new lighthouse in marks 1984 VPS

config-node.yaml

@@ -24,6 +24,7 @@ pki:
 #   "{nebula ip}": ["{routable ip/dns name}:{routable port}"]
 static_host_map:
   "10.10.100.1": ["185.112.144.69:4242"]
+  "10.10.100.21": ["93.95.230.219:4242"]
 
 lighthouse:
   # am_lighthouse is used to enable lighthouse functionality for a node. This should ONLY be true on nodes
@@ -33,9 +34,9 @@ lighthouse:
   # delegated to for resolution
   #serve_dns: false
   #dns:
-    # The DNS host defines the IP to bind the dns listener to. This also allows binding to the nebula node IP.
+  # The DNS host defines the IP to bind the dns listener to. This also allows binding to the nebula node IP.
-    #host: 0.0.0.0
+  #host: 0.0.0.0
-    #port: 53
+  #port: 53
   # interval is the number of seconds between updates from this node to a lighthouse.
   # during updates, a node sends information about its current IP addresses to each node.
   interval: 60
@@ -53,21 +54,21 @@ lighthouse:
   # "deny" rules are present, then you MUST set a rule for "0.0.0.0/0" as the
   # default.
   #remote_allow_list:
-    # Example to block IPs from this subnet from being used for remote IPs.
+  # Example to block IPs from this subnet from being used for remote IPs.
-    #"172.16.0.0/12": false
+  #"172.16.0.0/12": false
 
-    # A more complicated example, allow public IPs but only private IPs from a specific subnet
+  # A more complicated example, allow public IPs but only private IPs from a specific subnet
-    #"0.0.0.0/0": true
+  #"0.0.0.0/0": true
-    #"10.0.0.0/8": false
+  #"10.0.0.0/8": false
-    #"10.42.42.0/24": true
+  #"10.42.42.0/24": true
 
   # EXPERIMENTAL: This option my change or disappear in the future.
   # Optionally allows the definition of remote_allow_list blocks
   # specific to an inside VPN IP CIDR.
   #remote_allow_ranges:
-    # This rule would only allow only private IPs for this VPN range
+  # This rule would only allow only private IPs for this VPN range
-    #"10.42.42.0/24":
+  #"10.42.42.0/24":
-      #"192.168.0.0/16": true
+  #"192.168.0.0/16": true
 
   # local_allow_list allows you to filter which local IP addresses we advertise
   # to the lighthouses. This uses the same logic as `remote_allow_list`, but
@@ -77,12 +78,12 @@ lighthouse:
   # the inverse). CIDR rules are matched after interface name rules.
   # Default is all local IP addresses.
   #local_allow_list:
-    # Example to block tun0 and all docker interfaces.
+  # Example to block tun0 and all docker interfaces.
-    #interfaces:
+  #interfaces:
-      #tun0: false
+  #tun0: false
-      #'docker.*': false
+  #'docker.*': false
-    # Example to only advertise this subnet to the lighthouse.
+  # Example to only advertise this subnet to the lighthouse.
-    #"10.0.0.0/8": true
+  #"10.0.0.0/8": true
 
 # Port Nebula will be listening on. The default here is 4242. For a lighthouse node, the port should be defined,
 # however using port 0 will dynamically assign a port and is recommended for roaming nodes.
@@ -133,19 +134,19 @@ punchy:
 
 # sshd can expose informational and administrative functions via ssh this is a
 #sshd:
-  # Toggles the feature
+# Toggles the feature
-  #enabled: true
+#enabled: true
-  # Host and port to listen on, port 22 is not allowed for your safety
+# Host and port to listen on, port 22 is not allowed for your safety
-  #listen: 127.0.0.1:2222
+#listen: 127.0.0.1:2222
-  # A file containing the ssh host private key to use
+# A file containing the ssh host private key to use
-  # A decent way to generate one: ssh-keygen -t ed25519 -f ssh_host_ed25519_key -N "" < /dev/null
+# A decent way to generate one: ssh-keygen -t ed25519 -f ssh_host_ed25519_key -N "" < /dev/null
-  #host_key: ./ssh_host_ed25519_key
+#host_key: ./ssh_host_ed25519_key
-  # A file containing a list of authorized public keys
+# A file containing a list of authorized public keys
-  #authorized_users:
+#authorized_users:
-    #- user: steeeeve
+#- user: steeeeve
-      # keys can be an array of strings or single string
+# keys can be an array of strings or single string
-      #keys:
+#keys:
-        #- "ssh public key string"
+#- "ssh public key string"
 
 # Configure the private interface. Note: addr is baked into the nebula certificate
 tun:
@@ -178,7 +179,6 @@ tun:
     #  mtu: 1300
     #  metric: 100
 
-
 # TODO
 # Configure logging level
 logging:
@@ -198,39 +198,38 @@ logging:
   #timestamp_format: "2006-01-02T15:04:05.000Z07:00"
 
 #stats:
-  #type: graphite
+#type: graphite
-  #prefix: nebula
+#prefix: nebula
-  #protocol: tcp
+#protocol: tcp
-  #host: 127.0.0.1:9999
+#host: 127.0.0.1:9999
-  #interval: 10s
+#interval: 10s
 
-  #type: prometheus
+#type: prometheus
-  #listen: 127.0.0.1:8080
+#listen: 127.0.0.1:8080
-  #path: /metrics
+#path: /metrics
-  #namespace: prometheusns
+#namespace: prometheusns
-  #subsystem: nebula
+#subsystem: nebula
-  #interval: 10s
+#interval: 10s
 
-  # enables counter metrics for meta packets
+# enables counter metrics for meta packets
-  #   e.g.: `messages.tx.handshake`
+#   e.g.: `messages.tx.handshake`
-  # NOTE: `message.{tx,rx}.recv_error` is always emitted
+# NOTE: `message.{tx,rx}.recv_error` is always emitted
-  #message_metrics: false
+#message_metrics: false
 
-  # enables detailed counter metrics for lighthouse packets
+# enables detailed counter metrics for lighthouse packets
-  #   e.g.: `lighthouse.rx.HostQuery`
+#   e.g.: `lighthouse.rx.HostQuery`
-  #lighthouse_metrics: false
+#lighthouse_metrics: false
 
 # Handshake Manager Settings
 #handshakes:
-  # Handshakes are sent to all known addresses at each interval with a linear backoff,
+# Handshakes are sent to all known addresses at each interval with a linear backoff,
-  # Wait try_interval after the 1st attempt, 2 * try_interval after the 2nd, etc, until the handshake is older than timeout
+# Wait try_interval after the 1st attempt, 2 * try_interval after the 2nd, etc, until the handshake is older than timeout
-  # A 100ms interval with the default 10 retries will give a handshake 5.5 seconds to resolve before timing out
+# A 100ms interval with the default 10 retries will give a handshake 5.5 seconds to resolve before timing out
-  #try_interval: 100ms
+#try_interval: 100ms
-  #retries: 20
+#retries: 20
-  # trigger_buffer is the size of the buffer channel for quickly sending handshakes
+# trigger_buffer is the size of the buffer channel for quickly sending handshakes
-  # after receiving the response for lighthouse queries
+# after receiving the response for lighthouse queries
-  #trigger_buffer: 64
+#trigger_buffer: 64
-
 
 # Nebula security group configuration
 firewall: