diff --git a/config-lighthouse.yaml b/config-lighthouse.yaml
new file mode 100644
index 0000000..eba4ffa
--- /dev/null
+++ b/config-lighthouse.yaml
@@ -0,0 +1,274 @@
+# This is the nebula example configuration file. You must edit, at a minimum, the static_host_map, lighthouse, and firewall sections
+# Some options in this file are HUPable, including the pki section. (A HUP will reload credentials from disk without affecting existing tunnels)
+
+# PKI defines the location of credentials for this node. Each of these can also be inlined by using the yaml ": |" syntax.
+pki:
+  # The CAs that are accepted by this node. Must contain one or more certificates created by 'nebula-cert ca'
+  ca: |
+    -----BEGIN NEBULA CERTIFICATE-----
+    CjoKCEluZnJhbmV0KMqUjZIGMMr7kaEGOiC/vXvAOFjXGt69G9OIRjNKdrp/o1+A
+    sFilchjVAtaIVkABEkDI8SnMeA2t3UBwuxReGWCRk95eBG8W4RcvbEzVUnF7NWQA
+    pqOwkNEG/9+ZVtb5A/+FlNsRE3eFhCUrgOmkeP0L
+    -----END NEBULA CERTIFICATE-----
+  cert: /etc/nebula/host.crt
+  key: /etc/nebula/host.key
+  # blocklist is a list of certificate fingerprints that we will refuse to talk to
+  #blocklist:
+  #  - c99d4e650533b92061b09918e838a5a0a6aaee21eed1d12fd937682865936c72
+  # disconnect_invalid is a toggle to force a client to be disconnected if the certificate is expired or invalid.
+  #disconnect_invalid: false
+
+# The static host map defines a set of hosts with fixed IP addresses on the internet (or any network).
+# A host can have multiple fixed IP addresses defined here, and nebula will try each when establishing a tunnel.
+# The syntax is:
+#   "{nebula ip}": ["{routable ip/dns name}:{routable port}"]
+# Example, if your lighthouse has the nebula IP of 192.168.100.1 and has the real ip address of 100.64.22.11 and runs on port 4242:
+static_host_map:
+
+
+lighthouse:
+  # am_lighthouse is used to enable lighthouse functionality for a node. This should ONLY be true on nodes
+  # you have configured to be lighthouses in your network
+  am_lighthouse: true
+  # serve_dns optionally starts a dns listener that responds to various queries and can even be
+  # delegated to for resolution
+  #serve_dns: false
+  #dns:
+    # The DNS host defines the IP to bind the dns listener to. This also allows binding to the nebula node IP.
+    #host: 0.0.0.0
+    #port: 53
+  # interval is the number of seconds between updates from this node to a lighthouse.
+  # during updates, a node sends information about its current IP addresses to each node.
+  # interval: 60
+  # hosts is a list of lighthouse hosts this node should report to and query from
+  # IMPORTANT: THIS SHOULD BE EMPTY ON LIGHTHOUSE NODES
+  # IMPORTANT2: THIS SHOULD BE LIGHTHOUSES' NEBULA IPs, NOT LIGHTHOUSES' REAL ROUTABLE IPs
+  # hosts:
+  #   - "10.10.100.1"
+
+  # remote_allow_list allows you to control ip ranges that this node will
+  # consider when handshaking to another node. By default, any remote IPs are
+  # allowed. You can provide CIDRs here with `true` to allow and `false` to
+  # deny. The most specific CIDR rule applies to each remote. If all rules are
+  # "allow", the default will be "deny", and vice-versa. If both "allow" and
+  # "deny" rules are present, then you MUST set a rule for "0.0.0.0/0" as the
+  # default.
+  #remote_allow_list:
+    # Example to block IPs from this subnet from being used for remote IPs.
+    #"172.16.0.0/12": false
+
+    # A more complicated example, allow public IPs but only private IPs from a specific subnet
+    #"0.0.0.0/0": true
+    #"10.0.0.0/8": false
+    #"10.42.42.0/24": true
+
+  # EXPERIMENTAL: This option my change or disappear in the future.
+  # Optionally allows the definition of remote_allow_list blocks
+  # specific to an inside VPN IP CIDR.
+  #remote_allow_ranges:
+    # This rule would only allow only private IPs for this VPN range
+    #"10.42.42.0/24":
+      #"192.168.0.0/16": true
+
+  # local_allow_list allows you to filter which local IP addresses we advertise
+  # to the lighthouses. This uses the same logic as `remote_allow_list`, but
+  # additionally, you can specify an `interfaces` map of regular expressions
+  # to match against interface names. The regexp must match the entire name.
+  # All interface rules must be either true or false (and the default will be
+  # the inverse). CIDR rules are matched after interface name rules.
+  # Default is all local IP addresses.
+  #local_allow_list:
+    # Example to block tun0 and all docker interfaces.
+    #interfaces:
+      #tun0: false
+      #'docker.*': false
+    # Example to only advertise this subnet to the lighthouse.
+    #"10.0.0.0/8": true
+
+# Port Nebula will be listening on. The default here is 4242. For a lighthouse node, the port should be defined,
+# however using port 0 will dynamically assign a port and is recommended for roaming nodes.
+listen:
+  # To listen on both any ipv4 and ipv6 use "[::]"
+  host: 0.0.0.0
+  port: 4242
+  # Sets the max number of packets to pull from the kernel for each syscall (under systems that support recvmmsg)
+  # default is 64, does not support reload
+  #batch: 64
+  # Configure socket buffers for the udp side (outside), leave unset to use the system defaults. Values will be doubled by the kernel
+  # Default is net.core.rmem_default and net.core.wmem_default (/proc/sys/net/core/rmem_default and /proc/sys/net/core/rmem_default)
+  # Maximum is limited by memory in the system, SO_RCVBUFFORCE and SO_SNDBUFFORCE is used to avoid having to raise the system wide
+  # max, net.core.rmem_max and net.core.wmem_max
+  #read_buffer: 10485760
+  #write_buffer: 10485760
+
+# EXPERIMENTAL: This option is currently only supported on linux and may
+# change in future minor releases.
+#
+# Routines is the number of thread pairs to run that consume from the tun and UDP queues.
+# Currently, this defaults to 1 which means we have 1 tun queue reader and 1
+# UDP queue reader. Setting this above one will set IFF_MULTI_QUEUE on the tun
+# device and SO_REUSEPORT on the UDP socket to allow multiple queues.
+#routines: 1
+
+punchy:
+  # Continues to punch inbound/outbound at a regular interval to avoid expiration of firewall nat mappings
+  punch: true
+
+  # respond means that a node you are trying to reach will connect back out to you if your hole punching fails
+  # this is extremely useful if one node is behind a difficult nat, such as a symmetric NAT
+  # Default is false
+  #respond: true
+
+  # delays a punch response for misbehaving NATs, default is 1 second, respond must be true to take effect
+  #delay: 1s
+
+# Cipher allows you to choose between the available ciphers for your network. Options are chachapoly or aes
+# IMPORTANT: this value must be identical on ALL NODES/LIGHTHOUSES. We do not/will not support use of different ciphers simultaneously!
+#cipher: chachapoly
+
+# Preferred ranges is used to define a hint about the local network ranges, which speeds up discovering the fastest
+# path to a network adjacent nebula node.
+# NOTE: the previous option "local_range" only allowed definition of a single range
+# and has been deprecated for "preferred_ranges"
+#preferred_ranges: ["172.16.0.0/24"]
+
+# sshd can expose informational and administrative functions via ssh this is a
+#sshd:
+  # Toggles the feature
+  #enabled: true
+  # Host and port to listen on, port 22 is not allowed for your safety
+  #listen: 127.0.0.1:2222
+  # A file containing the ssh host private key to use
+  # A decent way to generate one: ssh-keygen -t ed25519 -f ssh_host_ed25519_key -N "" < /dev/null
+  #host_key: ./ssh_host_ed25519_key
+  # A file containing a list of authorized public keys
+  #authorized_users:
+    #- user: steeeeve
+      # keys can be an array of strings or single string
+      #keys:
+        #- "ssh public key string"
+
+# Configure the private interface. Note: addr is baked into the nebula certificate
+tun:
+  # When tun is disabled, a lighthouse can be started without a local tun interface (and therefore without root)
+  disabled: false
+  # Name of the device. If not set, a default will be chosen by the OS.
+  # For macOS: if set, must be in the form `utun[0-9]+`.
+  # For FreeBSD: Required to be set, must be in the form `tun[0-9]+`.
+  # dev: nebula1
+  # Toggles forwarding of local broadcast packets, the address of which depends on the ip/mask encoded in pki.cert
+  drop_local_broadcast: false
+  # Toggles forwarding of multicast packets
+  drop_multicast: false
+  # Sets the transmit queue length, if you notice lots of transmit drops on the tun it may help to raise this number. Default is 500
+  tx_queue: 500
+  # Default MTU for every packet, safe setting is (and the default) 1300 for internet based traffic
+  mtu: 1300
+  # Route based MTU overrides, you have known vpn ip paths that can support larger MTUs you can increase/decrease them here
+  routes:
+    #- mtu: 8800
+    #  route: 10.0.0.0/16
+  # Unsafe routes allows you to route traffic over nebula to non-nebula nodes
+  # Unsafe routes should be avoided unless you have hosts/services that cannot run nebula
+  # NOTE: The nebula certificate of the "via" node *MUST* have the "route" defined as a subnet in its certificate
+  # `mtu` will default to tun mtu if this option is not specified
+  # `metric` will default to 0 if this option is not specified
+  unsafe_routes:
+    #- route: 172.16.1.0/24
+    #  via: 192.168.100.99
+    #  mtu: 1300
+    #  metric: 100
+
+
+# TODO
+# Configure logging level
+logging:
+  # panic, fatal, error, warning, info, or debug. Default is info
+  level: info
+  # json or text formats currently available. Default is text
+  format: text
+  # Disable timestamp logging. useful when output is redirected to logging system that already adds timestamps. Default is false
+  #disable_timestamp: true
+  # timestamp format is specified in Go time format, see:
+  #     https://golang.org/pkg/time/#pkg-constants
+  # default when `format: json`: "2006-01-02T15:04:05Z07:00" (RFC3339)
+  # default when `format: text`:
+  #     when TTY attached: seconds since beginning of execution
+  #     otherwise: "2006-01-02T15:04:05Z07:00" (RFC3339)
+  # As an example, to log as RFC3339 with millisecond precision, set to:
+  #timestamp_format: "2006-01-02T15:04:05.000Z07:00"
+
+#stats:
+  #type: graphite
+  #prefix: nebula
+  #protocol: tcp
+  #host: 127.0.0.1:9999
+  #interval: 10s
+
+  #type: prometheus
+  #listen: 127.0.0.1:8080
+  #path: /metrics
+  #namespace: prometheusns
+  #subsystem: nebula
+  #interval: 10s
+
+  # enables counter metrics for meta packets
+  #   e.g.: `messages.tx.handshake`
+  # NOTE: `message.{tx,rx}.recv_error` is always emitted
+  #message_metrics: false
+
+  # enables detailed counter metrics for lighthouse packets
+  #   e.g.: `lighthouse.rx.HostQuery`
+  #lighthouse_metrics: false
+
+# Handshake Manager Settings
+#handshakes:
+  # Handshakes are sent to all known addresses at each interval with a linear backoff,
+  # Wait try_interval after the 1st attempt, 2 * try_interval after the 2nd, etc, until the handshake is older than timeout
+  # A 100ms interval with the default 10 retries will give a handshake 5.5 seconds to resolve before timing out
+  #try_interval: 100ms
+  #retries: 20
+  # trigger_buffer is the size of the buffer channel for quickly sending handshakes
+  # after receiving the response for lighthouse queries
+  #trigger_buffer: 64
+
+
+# Nebula security group configuration
+firewall:
+  conntrack:
+    tcp_timeout: 12m
+    udp_timeout: 3m
+    default_timeout: 10m
+    max_connections: 100000
+
+  # The firewall is default deny. There is no way to write a deny rule.
+  # Rules are comprised of a protocol, port, and one or more of host, group, or CIDR
+  # Logical evaluation is roughly: port AND proto AND (ca_sha OR ca_name) AND (host OR group OR groups OR cidr)
+  # - port: Takes `0` or `any` as any, a single number `80`, a range `200-901`, or `fragment` to match second and further fragments of fragmented packets (since there is no port available).
+  #   code: same as port but makes more sense when talking about ICMP, TODO: this is not currently implemented in a way that works, use `any`
+  #   proto: `any`, `tcp`, `udp`, or `icmp`
+  #   host: `any` or a literal hostname, ie `test-host`
+  #   group: `any` or a literal group name, ie `default-group`
+  #   groups: Same as group but accepts a list of values. Multiple values are AND'd together and a certificate would have to contain all groups to pass
+  #   cidr: a CIDR, `0.0.0.0/0` is any.
+  #   ca_name: An issuing CA name
+  #   ca_sha: An issuing CA shasum
+
+  outbound:
+    # Allow all outbound traffic from this node
+    - port: any
+      proto: any
+      host: any
+
+  inbound:
+    # Allow icmp between any nebula hosts
+    - port: any
+      proto: icmp
+      host: any
+
+    # Allow tcp/443 from any host with BOTH laptop and home group
+    - port: 443
+      proto: tcp
+      groups:
+        - laptop
+        - home
diff --git a/config-node.yaml b/config-node.yaml
new file mode 100644
index 0000000..281631b
--- /dev/null
+++ b/config-node.yaml
@@ -0,0 +1,273 @@
+# This is the nebula example configuration file. You must edit, at a minimum, the static_host_map, lighthouse, and firewall sections
+# Some options in this file are HUPable, including the pki section. (A HUP will reload credentials from disk without affecting existing tunnels)
+
+# PKI defines the location of credentials for this node. Each of these can also be inlined by using the yaml ": |" syntax.
+pki:
+  # The CAs that are accepted by this node. Must contain one or more certificates created by 'nebula-cert ca'
+  ca: |
+    -----BEGIN NEBULA CERTIFICATE-----
+    CjoKCEluZnJhbmV0KMqUjZIGMMr7kaEGOiC/vXvAOFjXGt69G9OIRjNKdrp/o1+A
+    sFilchjVAtaIVkABEkDI8SnMeA2t3UBwuxReGWCRk95eBG8W4RcvbEzVUnF7NWQA
+    pqOwkNEG/9+ZVtb5A/+FlNsRE3eFhCUrgOmkeP0L
+    -----END NEBULA CERTIFICATE-----
+  cert: /etc/nebula/host.crt
+  key: /etc/nebula/host.key
+  # blocklist is a list of certificate fingerprints that we will refuse to talk to
+  #blocklist:
+  #  - c99d4e650533b92061b09918e838a5a0a6aaee21eed1d12fd937682865936c72
+  # disconnect_invalid is a toggle to force a client to be disconnected if the certificate is expired or invalid.
+  #disconnect_invalid: false
+
+# The static host map defines a set of hosts with fixed IP addresses on the internet (or any network).
+# A host can have multiple fixed IP addresses defined here, and nebula will try each when establishing a tunnel.
+# The syntax is:
+#   "{nebula ip}": ["{routable ip/dns name}:{routable port}"]
+static_host_map:
+  "10.10.100.1": ["185.112.144.69:4242"]
+
+lighthouse:
+  # am_lighthouse is used to enable lighthouse functionality for a node. This should ONLY be true on nodes
+  # you have configured to be lighthouses in your network
+  am_lighthouse: false
+  # serve_dns optionally starts a dns listener that responds to various queries and can even be
+  # delegated to for resolution
+  #serve_dns: false
+  #dns:
+    # The DNS host defines the IP to bind the dns listener to. This also allows binding to the nebula node IP.
+    #host: 0.0.0.0
+    #port: 53
+  # interval is the number of seconds between updates from this node to a lighthouse.
+  # during updates, a node sends information about its current IP addresses to each node.
+  interval: 60
+  # hosts is a list of lighthouse hosts this node should report to and query from
+  # IMPORTANT: THIS SHOULD BE EMPTY ON LIGHTHOUSE NODES
+  # IMPORTANT2: THIS SHOULD BE LIGHTHOUSES' NEBULA IPs, NOT LIGHTHOUSES' REAL ROUTABLE IPs
+  hosts:
+    - "10.10.100.1"
+
+  # remote_allow_list allows you to control ip ranges that this node will
+  # consider when handshaking to another node. By default, any remote IPs are
+  # allowed. You can provide CIDRs here with `true` to allow and `false` to
+  # deny. The most specific CIDR rule applies to each remote. If all rules are
+  # "allow", the default will be "deny", and vice-versa. If both "allow" and
+  # "deny" rules are present, then you MUST set a rule for "0.0.0.0/0" as the
+  # default.
+  #remote_allow_list:
+    # Example to block IPs from this subnet from being used for remote IPs.
+    #"172.16.0.0/12": false
+
+    # A more complicated example, allow public IPs but only private IPs from a specific subnet
+    #"0.0.0.0/0": true
+    #"10.0.0.0/8": false
+    #"10.42.42.0/24": true
+
+  # EXPERIMENTAL: This option my change or disappear in the future.
+  # Optionally allows the definition of remote_allow_list blocks
+  # specific to an inside VPN IP CIDR.
+  #remote_allow_ranges:
+    # This rule would only allow only private IPs for this VPN range
+    #"10.42.42.0/24":
+      #"192.168.0.0/16": true
+
+  # local_allow_list allows you to filter which local IP addresses we advertise
+  # to the lighthouses. This uses the same logic as `remote_allow_list`, but
+  # additionally, you can specify an `interfaces` map of regular expressions
+  # to match against interface names. The regexp must match the entire name.
+  # All interface rules must be either true or false (and the default will be
+  # the inverse). CIDR rules are matched after interface name rules.
+  # Default is all local IP addresses.
+  #local_allow_list:
+    # Example to block tun0 and all docker interfaces.
+    #interfaces:
+      #tun0: false
+      #'docker.*': false
+    # Example to only advertise this subnet to the lighthouse.
+    #"10.0.0.0/8": true
+
+# Port Nebula will be listening on. The default here is 4242. For a lighthouse node, the port should be defined,
+# however using port 0 will dynamically assign a port and is recommended for roaming nodes.
+listen:
+  # To listen on both any ipv4 and ipv6 use "[::]"
+  host: 0.0.0.0
+  port: 4242
+  # Sets the max number of packets to pull from the kernel for each syscall (under systems that support recvmmsg)
+  # default is 64, does not support reload
+  #batch: 64
+  # Configure socket buffers for the udp side (outside), leave unset to use the system defaults. Values will be doubled by the kernel
+  # Default is net.core.rmem_default and net.core.wmem_default (/proc/sys/net/core/rmem_default and /proc/sys/net/core/rmem_default)
+  # Maximum is limited by memory in the system, SO_RCVBUFFORCE and SO_SNDBUFFORCE is used to avoid having to raise the system wide
+  # max, net.core.rmem_max and net.core.wmem_max
+  #read_buffer: 10485760
+  #write_buffer: 10485760
+
+# EXPERIMENTAL: This option is currently only supported on linux and may
+# change in future minor releases.
+#
+# Routines is the number of thread pairs to run that consume from the tun and UDP queues.
+# Currently, this defaults to 1 which means we have 1 tun queue reader and 1
+# UDP queue reader. Setting this above one will set IFF_MULTI_QUEUE on the tun
+# device and SO_REUSEPORT on the UDP socket to allow multiple queues.
+#routines: 1
+
+punchy:
+  # Continues to punch inbound/outbound at a regular interval to avoid expiration of firewall nat mappings
+  punch: true
+
+  # respond means that a node you are trying to reach will connect back out to you if your hole punching fails
+  # this is extremely useful if one node is behind a difficult nat, such as a symmetric NAT
+  # Default is false
+  #respond: true
+
+  # delays a punch response for misbehaving NATs, default is 1 second, respond must be true to take effect
+  #delay: 1s
+
+# Cipher allows you to choose between the available ciphers for your network. Options are chachapoly or aes
+# IMPORTANT: this value must be identical on ALL NODES/LIGHTHOUSES. We do not/will not support use of different ciphers simultaneously!
+#cipher: chachapoly
+
+# Preferred ranges is used to define a hint about the local network ranges, which speeds up discovering the fastest
+# path to a network adjacent nebula node.
+# NOTE: the previous option "local_range" only allowed definition of a single range
+# and has been deprecated for "preferred_ranges"
+#preferred_ranges: ["172.16.0.0/24"]
+
+# sshd can expose informational and administrative functions via ssh this is a
+#sshd:
+  # Toggles the feature
+  #enabled: true
+  # Host and port to listen on, port 22 is not allowed for your safety
+  #listen: 127.0.0.1:2222
+  # A file containing the ssh host private key to use
+  # A decent way to generate one: ssh-keygen -t ed25519 -f ssh_host_ed25519_key -N "" < /dev/null
+  #host_key: ./ssh_host_ed25519_key
+  # A file containing a list of authorized public keys
+  #authorized_users:
+    #- user: steeeeve
+      # keys can be an array of strings or single string
+      #keys:
+        #- "ssh public key string"
+
+# Configure the private interface. Note: addr is baked into the nebula certificate
+tun:
+  # When tun is disabled, a lighthouse can be started without a local tun interface (and therefore without root)
+  disabled: false
+  # Name of the device. If not set, a default will be chosen by the OS.
+  # For macOS: if set, must be in the form `utun[0-9]+`.
+  # For FreeBSD: Required to be set, must be in the form `tun[0-9]+`.
+  dev: nebula1
+  # Toggles forwarding of local broadcast packets, the address of which depends on the ip/mask encoded in pki.cert
+  drop_local_broadcast: false
+  # Toggles forwarding of multicast packets
+  drop_multicast: false
+  # Sets the transmit queue length, if you notice lots of transmit drops on the tun it may help to raise this number. Default is 500
+  tx_queue: 500
+  # Default MTU for every packet, safe setting is (and the default) 1300 for internet based traffic
+  mtu: 1300
+  # Route based MTU overrides, you have known vpn ip paths that can support larger MTUs you can increase/decrease them here
+  routes:
+    #- mtu: 8800
+    #  route: 10.0.0.0/16
+  # Unsafe routes allows you to route traffic over nebula to non-nebula nodes
+  # Unsafe routes should be avoided unless you have hosts/services that cannot run nebula
+  # NOTE: The nebula certificate of the "via" node *MUST* have the "route" defined as a subnet in its certificate
+  # `mtu` will default to tun mtu if this option is not specified
+  # `metric` will default to 0 if this option is not specified
+  unsafe_routes:
+    #- route: 172.16.1.0/24
+    #  via: 192.168.100.99
+    #  mtu: 1300
+    #  metric: 100
+
+
+# TODO
+# Configure logging level
+logging:
+  # panic, fatal, error, warning, info, or debug. Default is info
+  level: info
+  # json or text formats currently available. Default is text
+  format: text
+  # Disable timestamp logging. useful when output is redirected to logging system that already adds timestamps. Default is false
+  #disable_timestamp: true
+  # timestamp format is specified in Go time format, see:
+  #     https://golang.org/pkg/time/#pkg-constants
+  # default when `format: json`: "2006-01-02T15:04:05Z07:00" (RFC3339)
+  # default when `format: text`:
+  #     when TTY attached: seconds since beginning of execution
+  #     otherwise: "2006-01-02T15:04:05Z07:00" (RFC3339)
+  # As an example, to log as RFC3339 with millisecond precision, set to:
+  #timestamp_format: "2006-01-02T15:04:05.000Z07:00"
+
+#stats:
+  #type: graphite
+  #prefix: nebula
+  #protocol: tcp
+  #host: 127.0.0.1:9999
+  #interval: 10s
+
+  #type: prometheus
+  #listen: 127.0.0.1:8080
+  #path: /metrics
+  #namespace: prometheusns
+  #subsystem: nebula
+  #interval: 10s
+
+  # enables counter metrics for meta packets
+  #   e.g.: `messages.tx.handshake`
+  # NOTE: `message.{tx,rx}.recv_error` is always emitted
+  #message_metrics: false
+
+  # enables detailed counter metrics for lighthouse packets
+  #   e.g.: `lighthouse.rx.HostQuery`
+  #lighthouse_metrics: false
+
+# Handshake Manager Settings
+#handshakes:
+  # Handshakes are sent to all known addresses at each interval with a linear backoff,
+  # Wait try_interval after the 1st attempt, 2 * try_interval after the 2nd, etc, until the handshake is older than timeout
+  # A 100ms interval with the default 10 retries will give a handshake 5.5 seconds to resolve before timing out
+  #try_interval: 100ms
+  #retries: 20
+  # trigger_buffer is the size of the buffer channel for quickly sending handshakes
+  # after receiving the response for lighthouse queries
+  #trigger_buffer: 64
+
+
+# Nebula security group configuration
+firewall:
+  conntrack:
+    tcp_timeout: 12m
+    udp_timeout: 3m
+    default_timeout: 10m
+    max_connections: 100000
+
+  # The firewall is default deny. There is no way to write a deny rule.
+  # Rules are comprised of a protocol, port, and one or more of host, group, or CIDR
+  # Logical evaluation is roughly: port AND proto AND (ca_sha OR ca_name) AND (host OR group OR groups OR cidr)
+  # - port: Takes `0` or `any` as any, a single number `80`, a range `200-901`, or `fragment` to match second and further fragments of fragmented packets (since there is no port available).
+  #   code: same as port but makes more sense when talking about ICMP, TODO: this is not currently implemented in a way that works, use `any`
+  #   proto: `any`, `tcp`, `udp`, or `icmp`
+  #   host: `any` or a literal hostname, ie `test-host`
+  #   group: `any` or a literal group name, ie `default-group`
+  #   groups: Same as group but accepts a list of values. Multiple values are AND'd together and a certificate would have to contain all groups to pass
+  #   cidr: a CIDR, `0.0.0.0/0` is any.
+  #   ca_name: An issuing CA name
+  #   ca_sha: An issuing CA shasum
+
+  outbound:
+    # Allow all outbound traffic from this node
+    - port: any
+      proto: any
+      host: any
+
+  inbound:
+    # Allow icmp between any nebula hosts
+    - port: any
+      proto: icmp
+      host: any
+
+    # Allow tcp/443 from any host with BOTH laptop and home group
+    - port: 443
+      proto: tcp
+      groups:
+        - laptop
+        - home
diff --git a/docker-compose.yaml b/docker-compose.yaml
new file mode 100644
index 0000000..8fa969e
--- /dev/null
+++ b/docker-compose.yaml
@@ -0,0 +1,15 @@
+---
+version: "3"
+services:
+  nebula:
+    container_name: infranet
+    hostname: __HOSTNAME__
+    image: dcr.wallace.sh/scott/infranet:latest
+    volumes:
+      - /home/scott/tmp/infranet:/etc/nebula
+    cap_add:
+      - NET_ADMIN
+    devices:
+      - /dev/net/tun
+    environment:
+      - TZ=Europe/London
diff --git a/docker-entrypoint.sh b/docker-entrypoint.sh
index 1842504..6741286 100644
--- a/docker-entrypoint.sh
+++ b/docker-entrypoint.sh
@@ -6,16 +6,27 @@ DATA_DIR=/etc/nebula
 HOSTNAME=$(hostname)
 
 if test -z "${NEBULA_IP}"; then
-    echo "You did not set a value for the environment variable NEBULA_IP"
+    echo 'You did not set a value for the environment variable NEBULA_IP'
+    exit 1
+fi
+
+if test "${HOSTNAME}" == '__HOSTNAME__'; then
+    echo 'You did not set a hostname for the Docker container'
     exit 2
 fi
 
 # --------------------- TESTING ONLY ------------------------
-# Build certs if they don't exist
-if ! test -f ${DATA_DIR}/ca.key; then
+# Build host certs if they don't exist
+if ! test -f ${DATA_DIR}/host.crt; then
     cd ${DATA_DIR} || exit 1
-    "${BIN_DIR}/nebula-cert" ca -name "Infranet"
-    "${BIN_DIR}/nebula-cert" sign -name "${HOSTNAME}" -ip "${NEBULA_IP}" -out-key host.key -out-crt host.crt
+    if ! test -d ${DATA_DIR}/host.csr; then
+        "${BIN_DIR}/nebula-cert" keygen -name "${HOSTNAME}" -out-key host.key -out-pub host.csr
+        echo 'You will need to get the `host.csr` file signed by a cluster admin'
+        exit 3
+    else
+        echo 'Awaiting `host.csr` to be signed'
+        exit 4
+    fi
 fi
 # -----------------------------------------------------------